|
Keep your big dish in top
operating condition with quality satellite replacement
parts.
Serve up a better picture
with a new satellite dish. Size does make a difference!
For the very best, static-free picture or for a digital 4DTV
satellite system, use a larger mesh dish. We recommend a
minimum of 8.5' dish for digital C-band reception. We also
carry satellite dish replacement parts, such as ribs,
struts, perimeter channels, front and back plates and
replacement mesh panels. Call us!
You need a steady arm to
hit the target. Check out our selection of replacement
dish movers (actuator arms). Ball Screw or Acme Thread? The
acme thread dish mover has become know as the industry
standard. It is a mechanically reliable system that will
push and pull your dish your many years with minimal
maintenance. The improved ball screw actuator arm adds ball
bearings that move up and down the shaft for added power on
big satellite dishes. This offers a smoother, quieter
operation and a longer life, especially on large size
satellite dishes.
The LNB is the heart of
your satellite system - it amplifies the satellite
signal thousands of times. If it's not working, you don't
have a picture. C-band LNBs are measured in degrees Kelvin,
and Ku-band LNBs are measured in decibels. The lower the
temperature or decibels, the better your picture. We carry a
variety of LNBs including Norsat C-band and Ku-band LNBs.
Feedhorns, available in
C-band and Ku-band feeds, or a combination of both, gather
the maximum signal from your dish for the best picture.
We also carry a variety of feed accessories including
feed horn covers, servo motors, C-Ku-band switches and more.
The quality of cable you
use determines the quality of satellite signal you get.
The use of cheap, low-quality cable may cause you to lose
20% to 30% of your signal. Skyvision carries only the best
for low signal loss. You'll find ribbon cable, coaxial
cable, dish mover cable, feed horn cable - all sold either by
the foot or in kits that include everything you need to do a
professional job.
Keep the moisture out of
your cable connections with weatherproof or compression
connectors. Moisture is the #1 enemy of your satellite
system. In addition to weatherproof connectors and
compression connectors, we recommend Coax Water Seal and
Dielectric Seal.
The right tool for the
right job makes all the difference. We've always said
"you can do it yourself." To get professional results on all
of your do-it-yourself projects, try any of the Skyvision
satellite tools that make jobs a breeze. For cable projects,
we offer cable tool and fitting kits, coax stripper kits and
crimping tools. When setting up and/or aiming your satellite
system, try a protractor aiming tool, compass/inclinometer
or satellite locator survey tool. And did we mention our
handy tune-up kits? Get peak satellite dish performance with
the Universal Satellite Finder Tune-Up Kit with everything
you need to do it yourself!
Catching your local
weather is a breeze with easy-to-assemble off-air antennas.
For the clearest off-air reception of local programming, a
good off-air antenna is a must. And now many off-air
antennas also receive high definition signals. Check out our
selection of VHF/UHF antennas for metro areas, deep fringe
areas or any place in between.
|
